Select a Product Category:
| Toll-Free: 1-800-848-2090 | Email: sales@anu-co.com | NEW PRODUCTS |
NEW:
30-Cycle Transfer SwitchesIndustry's Most Comprehensive Line of UL Tested, Listed & Labeled 30-Cycle Transfer Switches
With
the new Russelectric 30-Cycle RTS Series Automatic Transfer
Switches - selective coordination has just gotten a whole
lot easier! Tested, listed and labeled by UL under UL-1008, the RTS Series can close on and withstand fault current for 30 cycles. The RTS Series allows selective coordination of upstream overcurrent devices with downstream devices by allowing those devices closest to the fault to interrupt power - dramatically simplifying both the specification and coordination of overcurrent devices.
High Performance Design
Russelectric automatic transfer switches are modern, high speed switching devices designed to transfer electrical loads from a preferred power source to an alternate power source when voltage and/or frequency varies from preset limits, and to retransfer loads when the preferred source is restored. The Russelectric RTS Series utilizes simple electrical operators to provide high-speed, quick-break, quick-make, preloaded transfers. The operators are connected to the switch mechanism through precision self-aligning, ball joints and heavy-duty linkage rods which prevent misalignment.
Built Rugged for Long Life, Minimum Maintenance & Trouble-Free Service
 |
 |
Russelectric builds all its transfer switches for years of reliable, trouble-free operation with a minimum of maintenance. In fact, many Russelectric switches have been in continuous service at critical facilities for over 40 years. It is no surprise that Russelectric is the supplier of choice for high integrity power control and protection systems among the leading Fortune 1000 companies.
Russelectric transfer switch contacts are segmented and have tungsten arcing tips. All contacts are machined from solid copper - not case, forged or stamped. All mechanical assemblies, linkages, and connecting rods are purpose-built and precision-machined in-house. Mechanical linkages are sturdy anodized steel rods - machined, not stamped or riveted - with aircraft style ball joint fittings. Bus bar is solid copper, silver plated in accordance with UL and ANSI standards. All bus is formed, cut and punched before being plated to guarantee the integrity of the silver plating and ensure maximum performance. Enclosures are fabricated with code gauge steel to meet UL and other applicable standards. All enclosures feature arc-welded seams, extra bracing, and smooth ground corners. Switches are seismic tested to International Building Code requirements for earthquake compliance. All transfer switches are thoroughly inspected both mechanically and electrically under simulated operating conditions before shipment.
RPTCS ATS Control System
The
Russelectric RPTCS microprocessor automatic transfer control
system controls all operational functions of the ATS.
Each RPTCS is programmed at the factory to control
customer-specified options as well as standard switch
features. Setup, alarm acknowledgement, and review of
actual data are easily accomplished using the controller's
soft keys and VGA color display. The intuitive,
interactive menu guides the user through controller setup
and the entering of configuration data, including
communications and timing setpoints, adjustable control
parameters (interlocks, alarms and security), and event
logging. Real-time metering of voltage (phase-to-phase and phase-to-neutral) and frequency of both standard, and metering of current and power is available. The RPTCS can also monitor power quality with available waveform and historical trending. All metering can be accessed through the menu.
The controller senses Source 1 (usually the electric utility source) and Source 2 (usually the engine generator source) voltages and, by means of easy-to-use LEDs, indicates switch position and source availability. Through the menu, the user can also review operational data such as active time delays, transfer inhibits, metered values, fault and alarm reports, event records and configuration settings. The controller also automatically displays the status of monitored conditions in color-coded banners at the top of the VGA screen including faults and alarms, inhibits, and informational messages.
The RPTCS controller supports two communication interfaces: standard Modbus RTU or available Modbus TCP/IP via 10/100 Base-T Ethernet. An external USB communication port on the controller's faceplate allows fast, easy connection to a laptop. Controller design accommodates the addition of accessories.
Visit www.russelectric.com for more information on the Russelectric 30-Cycle RTS Series.
For sales and application support for Russelectric 30-Cycle RTS Series Automatic Transfer Switches email us at sales@anu-co.com or speak with a representative at 800-848-2090.
The
Arthur N. Ulrich Company proudly represents Russelectric in the
following shaded areas: - Ohio
- Kentucky
- West Virginia
- Indiana
- Michigan (lower pennisula)
- Western Pennsylvania
- Eastern Tennessee
Arthur N. Ulrich Company
10340 Palmer Rd. S.W.
Pataskala, OH 43062
800-848-2090