Select a Product Category:
| Toll-Free: 1-800-848-2090 | Email: sales@anu-co.com | NEW PRODUCTS |
Heat Recovery Systems 
One
of the most important equipment components in an engine driven
equipment installation, is the Waste Heat Recovery System. This
system must be designed to provide positive engine cooling and
obtain a maximum economical heat recovery while insuring reliability
and longevity of equipment. One of the oldest and most successful
forms of heat recovery employs VAPORPHASE (ebullient) cooling of the
reciprocating engine. Ebullient cooling involves the natural
circulation of the jacket water at or near saturation temperature
and engine cooling is accomplished through utilization of the heat
of vaporization. This is known to be the simplest and most cost
effective form of waste heat recovery. There are several benefits
to VAPORPHASE cooling including: elimination of the jacket water
circulating pump, extended engine life due to uniform temperatures
throughout the engine (normally 2-3°
differential between inlet and outlet), recovered heat in the form
of low pressure steam (up to 15 PSIG) and all of the heat rejected
to the jacket water is recovered. Learn more about Vaporphase Heat Recovery Systems.
For sales and application support for Vaporphase Heat Recovery Systems email us at sales@anu-co.com or speak with a representative at 800-848-2090
Visit www.vaporphase.net for additional product information
The
Arthur N. Ulrich Company proudly represents Kickham Boiler &
Engineering, Inc Vaporphase Division in the following shaded areas:
- Ohio
- Kentucky
- West Virginia
- Western Pennsylvania
Arthur N. Ulrich Company
10340 Palmer Rd. S.W.
Pataskala, OH 43062
800-848-2090